Course Description
About the Course
Abhijith Electronic Solution offers specialized training in Analog VLSI Design and CMOS Circuit Design for electronics students, graduates, and aspiring semiconductor engineers.
This course introduces the principles of CMOS technology and transistor-level analog integrated circuit design. Participants will study MOSFET operation, transistor biasing, current mirrors, differential amplifier architectures, operational amplifier design, frequency response, stability, and low-power circuit techniques.
The program combines theoretical concepts, circuit analysis, schematic development, and SPICE-based simulation to help learners understand how analog building blocks are designed and evaluated in integrated circuits.
Key Learning Outcomes
- Understand CMOS technology and MOSFET characteristics.
- Analyse transistor-level analog circuits.
- Design current mirrors and biasing networks.
- Develop differential amplifier circuits.
- Understand operational amplifier architectures.
- Analyse gain, bandwidth, noise, and stability.
- Perform DC, AC, and transient simulations.
- Evaluate power consumption and design trade-offs.
Why Choose Abhijith Electronic Solution?
- Practical transistor-level circuit design.
- Semiconductor industry-oriented learning.
- SPICE simulation and circuit analysis.
- Guided analog IC design exercises.
- Mini-projects and technical documentation.
- Customized college workshops and corporate training.
Who Can Join?
B.E./B.Tech students, M.E./M.Tech students, graduates, and aspiring analog design, mixed-signal design, and semiconductor engineers.
Abhijith Electronic Solution offers specialized training in Analog VLSI Design and CMOS Circuit Design for electronics students, graduates, and aspiring semiconductor engineers.
This course introduces the principles of CMOS technology and transistor-level analog integrated circuit design. Participants will study MOSFET operation, transistor biasing, current mirrors, differential amplifier architectures, operational amplifier design, frequency response, stability, and low-power circuit techniques.
The program combines theoretical concepts, circuit analysis, schematic development, and SPICE-based simulation to help learners understand how analog building blocks are designed and evaluated in integrated circuits.
Key Learning Outcomes
- Understand CMOS technology and MOSFET characteristics.
- Analyse transistor-level analog circuits.
- Design current mirrors and biasing networks.
- Develop differential amplifier circuits.
- Understand operational amplifier architectures.
- Analyse gain, bandwidth, noise, and stability.
- Perform DC, AC, and transient simulations.
- Evaluate power consumption and design trade-offs.
Why Choose Abhijith Electronic Solution?
- Practical transistor-level circuit design.
- Semiconductor industry-oriented learning.
- SPICE simulation and circuit analysis.
- Guided analog IC design exercises.
- Mini-projects and technical documentation.
- Customized college workshops and corporate training.
Who Can Join?
B.E./B.Tech students, M.E./M.Tech students, graduates, and aspiring analog design, mixed-signal design, and semiconductor engineers.
What You'll Learn
Module 1: Fundamentals of Analog VLSI
- Introduction to VLSI and analog integrated circuits.
- Analog, digital, and mixed-signal ICs.
- CMOS fabrication process overview.
- Integrated circuit design flow.
- Introduction to semiconductor device models.
Module 2: MOSFET Device Physics
- NMOS and PMOS operation.
- MOSFET operating regions.
- Threshold voltage and body effect.
- Drain current and transconductance.
- Channel-length modulation.
- MOSFET capacitances and small-signal models.
Module 3: CMOS Circuit Design
- CMOS inverter operation and characteristics.
- Static and dynamic power consumption.
- CMOS logic fundamentals.
- Transistor sizing and design trade-offs.
- Process, voltage, and temperature variations.
Module 4: Biasing and Current Mirrors
- MOSFET biasing techniques.
- Reference current generation.
- Basic and improved current mirrors.
- Cascode current mirrors.
- Output resistance and matching considerations.
Module 5: Differential Amplifiers
- Differential pair operation.
- Differential and common-mode signals.
- Differential gain and common-mode rejection.
- Active loads and current-source biasing.
- Small-signal analysis and design considerations.
Module 6: Operational Amplifier Design
- Single-stage and multistage amplifiers.
- CMOS operational amplifier architectures.
- Open-loop gain and bandwidth.
- Slew rate and output swing.
- Frequency compensation and stability.
- Basic two-stage CMOS op-amp design.
Module 7: Frequency Response and Noise
- Poles, zeros, and frequency response.
- Gain-bandwidth trade-offs.
- Phase margin and stability analysis.
- Thermal and flicker noise fundamentals.
- Power, performance, and area optimization.
Module 8: SPICE Simulation and Design Project
- Introduction to SPICE-based circuit simulation.
- DC operating-point analysis.
- AC frequency-response analysis.
- Transient analysis.
- Parameter sweeps and corner analysis.
- Design, simulation, and performance evaluation of a CMOS analog building block.
- Final project report and technical presentation.
- Introduction to VLSI and analog integrated circuits.
- Analog, digital, and mixed-signal ICs.
- CMOS fabrication process overview.
- Integrated circuit design flow.
- Introduction to semiconductor device models.
Module 2: MOSFET Device Physics
- NMOS and PMOS operation.
- MOSFET operating regions.
- Threshold voltage and body effect.
- Drain current and transconductance.
- Channel-length modulation.
- MOSFET capacitances and small-signal models.
Module 3: CMOS Circuit Design
- CMOS inverter operation and characteristics.
- Static and dynamic power consumption.
- CMOS logic fundamentals.
- Transistor sizing and design trade-offs.
- Process, voltage, and temperature variations.
Module 4: Biasing and Current Mirrors
- MOSFET biasing techniques.
- Reference current generation.
- Basic and improved current mirrors.
- Cascode current mirrors.
- Output resistance and matching considerations.
Module 5: Differential Amplifiers
- Differential pair operation.
- Differential and common-mode signals.
- Differential gain and common-mode rejection.
- Active loads and current-source biasing.
- Small-signal analysis and design considerations.
Module 6: Operational Amplifier Design
- Single-stage and multistage amplifiers.
- CMOS operational amplifier architectures.
- Open-loop gain and bandwidth.
- Slew rate and output swing.
- Frequency compensation and stability.
- Basic two-stage CMOS op-amp design.
Module 7: Frequency Response and Noise
- Poles, zeros, and frequency response.
- Gain-bandwidth trade-offs.
- Phase margin and stability analysis.
- Thermal and flicker noise fundamentals.
- Power, performance, and area optimization.
Module 8: SPICE Simulation and Design Project
- Introduction to SPICE-based circuit simulation.
- DC operating-point analysis.
- AC frequency-response analysis.
- Transient analysis.
- Parameter sweeps and corner analysis.
- Design, simulation, and performance evaluation of a CMOS analog building block.
- Final project report and technical presentation.
Requirements
- - Laptop or desktop computer.
- - Basic electronics and circuit analysis knowledge.
- - Access to a SPICE-compatible simulator, such as LTspice or ngspice.
- - Access to a schematic capture tool.
- - Willingness to perform circuit calculations and simulation exercises.
- - CMOS process design kits and foundry-specific tools are optional for introductory training and depend on the selected advanced training track.
Prerequisites
- - Basic electrical and electronic engineering knowledge.
- - Familiarity with semiconductor devices and circuit analysis is recommended.
- - Basic understanding of MOSFETs is beneficial.
- - Mathematics fundamentals, including algebra and differential equations, are helpful.
- - No previous analog IC design experience is required for beginner-level batches.
Student Reviews & Feedback
Verified reviews submitted by students who attended this course.
No Student Reviews Yet for This Course
Verified reviews from enrolled students will appear here in real time.
Share This Course
Related Courses
Embedded Systems & Microcontroller Programming
Master ARM7, 8051, PIC, and AVR microcontroller architectures with bare-metal C ...
30 days
24 seats left
View Details
VLSI Design and Verification Using Verilog HDL
Learn digital logic design, Verilog HDL, RTL coding, simulation, functional veri...
30 days
20 seats left
View Details
Internet of Things (IoT) – From Fundamentals to Real-World Applications
Learn how smart devices communicate, collect data, and interact with the real wo...
30 days
19 seats left
View Details